河南安家净环保科技有限公司专业生产聚氯化铝，主要分为饮水级，工业级，生产工艺主要分为喷雾法，滚筒法，

滚筒式聚氯化铝 铝含量一般,水不溶物高,多用于污水处理.

板框式聚氯化铝 铝含量高， 水不溶物低. 用于污水处理和饮用处理.

喷雾干燥聚氯化铝 铝含量高， 水不溶物低，溶解速度快，用于饮用水及更高标准水处理.

PAC聚氯化铝由于喷雾干燥稳定性好，适应水域宽，水解速度快，吸附能力强，形成矾花大，质密沉淀快，出水浊度低，脱水性能好等优点，在同样水质的情况下，喷雾干燥聚氯化铝投加量减少，尤其在水质不好的情况下，喷雾干燥产品投量与滚筒干燥聚氯化铝相比，可减少一半，不仅减轻了工人的劳动强度，而更重要的是减少用户的制水成本。除此之外，用喷雾干燥产品可***安全性，减少水事故，对居民饮用水非常***。When treating drinking water, polyaluminium chloride with low content will have more impurities and water insolubles, so high content is required. Especially in papermaking, cosmetics production is to use high content.

Drinking water must be treated at drinking water level. Heavy metals are not detected at industrial level, and insoluble substances in water are also higher than drinking water. Generally speaking, drinking water level is related to human life and can not be used arbitrarily. It must be a real drinking water level. If industrial level is used for drinking water, there are many hidden dangers. And the purity is different, industrial use is 26-28%, drinking water is 30%.

人民共和国***《GB14591-2006 水处理剂 聚合硫酸铁》,且符合NSF 和 AWWA B 406-2006***。聚合硫酸铁、硫酸铁产品能安全地用在城镇生活饮用水，还广泛用于工业循环水的净化处理，以及化工、石油、矿山、造纸、发电厂、印染、酿造、钢铁、煤制气、电镀等行业的工业废水和城市生活污水及污泥脱水等的净化处理，对不同的地区不同种类源水都能达到理想的净化效果。

   聚合硫酸铁、硫酸铁可以安全***用在养殖业，通过控制铁离子的溶解速度，将聚合硫酸铁、硫酸铁和饲料混拌，投加到水体中，聚合硫酸铁、硫酸铁溶解后发生水解，通过絮凝作用，将水中的污染物快速沉降，在水底人为构建富铁富营养生态系统，减少水中的耗氧物质，增加水中的溶解氧，减少水产品由于缺氧而死亡的几率，促进微生物生长。

1、新型、优质、高效铁盐类无机高分子净水剂。

2、高有效成分，高Fe3+含量，混凝性能优良，矾花密实，沉降速度很快；5-30分钟沉降完全，有辅助沉降设施时，则沉降更快。

3、水溶性好，不溶物低，重金属含量低，净水效果优良，出水水质好，即使过量10倍也无铁离子的水相转移，不会使水发黄。

4、性能稳定，溶解后可长期存放，不沉淀、不变质、更不会堵管道。

5、具有***脱色、脱臭、脱水、脱油、***、脱除水中重金属离子、放射性物质及致癌物等多种功效，有***去除COD、BOD的能力。

6、***无害，***，***解决了使用铝盐净水剂造成饮用水铝离子超标的难题，被称为绿色净水剂。

7、适应水体pH范围为4-11，pH值为6-9；净化后的pH值变化幅度小，并能降低水的硬度。

8、对微污染、含藻类、低温低浊原水净化有独特功效。

9、本产品是普通聚铁的换代产品，无亚硝酸根离子、氯离子残留，物理化学性能优良，是出口的理想产品。

10、可以根据客户特殊用途调整配方。因原水性质各异，应根据不同情况，现场调试或作烧杯试验，取得使用条件和投药量以达到的处理效果。

w content is not too much, you can put more medicines can also achieve the desired effect.

Henan an Jia Jing Environmental Protection Technology Co., Ltd. specializes in the production of polyaluminium chloride, which is mainly divided into drinking water level and industrial grade. The production process is mainly divided into spray method and roller method.

Drum-type polyaluminium chloride is generally used for sewage treatment because of its high water insoluble content.

Plate-frame polyaluminium chloride has high content and low water insoluble. It is used for sewage treatment and drinking treatment.

Spray drying has high content of polyaluminum chloride, low insoluble substance and fast dissolution rate. It is used for drinking water and higher standard water treatment.

PAC polyaluminium chloride has the advantages of good stability in spray drying, wide adaptation to water area, fast hydrolysis speed and strong adsorption capacity. It has the advantages of large alum, high quality and fast sedimentation, low turbidity and good dewatering performance. Under the same water quality, the dosage of spray drying polyaluminum chloride is reduced, especially when the water quality is not good, the product volume of spray drying is compared with that of drum drying polyaluminum chloride. It can be reduced by half, which not only reduces the labor intensity of workers, but also, more importantly, reduces the cost of water production for users. In addition, spray drying products can ensure safety and reduce water accidents, which is very safe and reliable for drinking water.